COMMON TERMS IN ACTIVATED CARBON WORLD

The abrasion number of granular carbon defines the resistance of the particles to degrade on handling. It is calculated by contacting a carbon sample with steel balls in a Ro-Tap machine and determining the percent ratio of the final mean particle diameter to the original mean particle diameter.

Activated carbon is a crude form of graphite, with a random or amorphous structure, which is highly porous over a broad range of pore sizes, from visible cracks and crevices to cracks and crevices of molecular dimensions.

ACTIVATED CARBON Carbon which has been contacted with an acid solution with the purpose of dissolving ash in the activated carbon.

That which is adsorbed on the adsorbent.

Any solid having the ability to concentrate significant quantities of other substances on its surface. Activated carbon is an adsorbent.

A vessel designed to hold granular carbon.

The phenomenon whereby molecules adhere to a surface with which they come in contact.

A measurement of adsorption determined at a constant temperature by varying the amount of carbon used or the concentration of impurity in contact with the carbon.

The finest pores in the carbon structure. Pores which have adsorption capabilities.

The weight per unit volume of activated carbon.

The mineral oxide constituents of activated carbon. It is normally defined as a weight percent basis after given amount of sample is oxidized.

An operating method used to remove suspended solids from the carbon bed. Water is pumped into the bottom of the adsorber, flows upward through the carbon bed, and exits through the backwash outlet. The upward flow expands the bed and removes the suspended solids, carbon fines, and entrained air. The percent bed expansion and time required for backwashing is a function of the backwash rate and water temperature.

The amount of carbon expressed in length units, which is parrallel to the flow of the stream and through which the stream must pass.

The volume of butane adsorbed per unit weight of activated carbon after air saturated with butane is passed through a carbon bed at a given temperature and pressure.

A column filled with granular activated carbon whose primary function is the preferential adsorption of a particular type or types of molecules.

The maximum percentage increase in weight of a bed of activated carbon after air saturated with carbon tetrachloride is passed through it at a given temperature.

Adsroption where the forces holding the adorbate to the adsorbent are chemical (valence) instead of physical (London's).

Those complex molecules which impart color (usually undesirable) to a solution.

The unique advantage of a caron column that permits partially spent activated carbon to adsorb impurities before the semi-processed stream comes in contact with fresh carbon. This allows the maximum capasity of the activated carbon to be utilized.

In a carbon column the critical bed depth is the depth of granular carbon which is partially spent. It lies between the fresh carbon and the spent carbon and is the zone where adsorption takes place. In a single column system, this is the amount of carbon that is not completely utilized. See MASS TRANSFER ZONE

The area of activated carbon through which the stream flow is perpendicular.

The process of removnig air (gases) from a bed of carbon particles. In a volume of 1m3 of activated carbon, there are approximately 40% of void space, 40% of pore volume and 20% of carbon skeleton.

The opposite of adsorption. A phenomenon where an adsorbed molecule leaves the surface of the adsorbent.

Device with no moving parts used to force an activated carbon water slurry through pipes to the desired location.

The heat given off when molecules are adsorbed.

The hardness number is the resistance of a granular carbon to the degradation action of steel balls in a Ro-Tap machine. It is calculated by using the weight of granular carbon retained on a particular sieve after the carbon has been in contact with steel balls.

The iodine number is the milligrams of iodine adsorbed by one gram of carbon at a filtrate concentration of 0.02N iodine.

Fresh granular activated carbon which must be added to a column system after a regeneration cycle or when deemed necessary to bring the total amount of carbon to specification.

See Transport porse

The adsorption gradient that exists in the carbon bed. It corresponds to the gradual transition of the carbon from "fresh" (or "virgin") to "spent" (or "exhausted").

The particle size of granular activated carbon as determined by the U.S. Sieve Series. Particle size distribution within a mesh series is given in the specifications of the particular activated carbon.

The molasses number is calculated from the ratio of the optical densities of the filtrate of a molasses solution treated with a standard activated carbon and the activated carbon in question.

The methylene blue number is the milligrams of methylene blue adsorbed by one gram of carbon in equilibrium with a solution of methylene blue having a concentration of 1.0 mg per liter.

The percent by weight of water adsorbed on activated carbon.

A unique application with granular carbons in which a single carbon column offers the efficiency of several columns in series. This is accomplished by the removal of spent carbon from one end of the carbon bed and the addition of fresh carbon at the other end with little or no interuption in the process.

The weight per unit volume of granular activated carbon not including the voids between the particles and cracks larger than 0.1 mm. It is determined by the displacement by granular activated carbon in mercury and in helium at standard conditions.

The volume of the internal void spaces in a granule, smaller than 0.1 mm and large enough to allow access to helium. It is measured as the difference in the voulumetric displacement by granular activated carbon in mercury and in helium at standard conditions.

The density of the skeleton of a carbon granule. This is determined by helium displacement.

The removal of adsorbates from spent granular activated carbon which will allow the carbon to be reused and recycled.

The quantity of heat required to raise the temperature of a unit weight of granular activated carbon through a particular interval of temperature divided by the corresponding quantity for water. Typical value for Granular Activated Carbon is 0.25. It should be noted that the thermal conductivity of granular activated carbon is extremely low.

The surface area of granular activated carbon is empirically determined by the Brunauer, Emmett and Teller Method, which utilizes the adsorption of nitrogen at liquid nitrogen temperature in the calculation. Surface area is usually expressed in square meters per gram of carbon. Typical carbons range from 600 to 2,200 square meters per gram.

Pores larger than the largest adsorption pores. They function as a diffusion path to transport adsorbates. Adsorption does not occur in these locations even at near saturated conditions.

The percent by volume of the interstices to total bed volume.

The carbon loading gradient that exists in the critical bed depth. It corresponds the gradual transition of the carbon from "fresh" (or "virgin") to "spent" (or "exhausted").