|
||||||||||||||||||||
|
|
 |
 Emergency air quality control, pilot testing, process vent control, laboratory hood exhaust, tank or sump vent exhaust, sewer gas vent exhaust, soil vapor extraction systems.
3000 LBS MILD STEEL VESSEL (v-3000) V-3000
is fabricated from mild steel. All units have two part epoxy coatings on
the inside and industrial enamel on the outside to give a long service
life. Steel FNPT inlet / outlet fittings are connected to PVC internals
for corrosion resistance. The V-3000 has an internal carbon support
grate and polypropylene retention screen.The units have forklift access, lifting lugs, and a screened drain and top manhole.
V-3000 requires no special procedure for start up. Remove the shipping plugs from the inlet and outlet and make the proper connections to your system. The unit is now ready for service and can be started up. Unions or quick connect fittings are recommended if the unit will be disconnected frequently. Multiple units are usually connected in series with testing advised between the units to determine when the first unit needs to be changed out. Once the carbon is saturated by contaminants, the unit should be taken off line. If connected in a series mode, the next down stream unit should be moved into the lead position and a fresh unit put at the end of the train. All shipping plugs must be replaced when the unit is to be transported. The working life of each absorber is dependent upon the type of contaminant in the air as well as its concentration and the air flow rate. A pressure relief device is advised to prevent damage to the canister in the event of excessive pressure buildup. Please look our selection of VAPOR PHASE ACTIVATED CARBON MEDIA. To purchase replacement carbon or to arrange for a carbon change out please contact us at 626-858-1888 |
||||||||||||||||||
 |
||||||||||||||||||||
